How to Resolve the Brother Printer Error 46?Mark Davis
Brother Printers are one of the most famed and valuable brands in the imaging and printing industry. We have received different types of error in the use of Brother Printer. A well-known issue we have received from the Brother Printer, its Printer Error 46. According to the website, this error is shown on a Brother printer if “absorber pad” is full in your printer.
What is Absorber Pad?
Absorber pad is only a piece of wipe to the additional ink when the printing procedure is going on. It’s just an additional ink absorber while cleaning. An absorber pad is placed at the base of your ink cartridge and absorbs the extra leaked and unused ink from the printer. When this gets soaked or for some other reason, your printer will show the error 46 message. You find the below an easy procedure of, How to resolve this issue from your printer?
Procedure to resolve the Brother Printer Error 46:
- Close down your printer first and after that disconnect it from the power plug.
- Now, press the “Menu” or “Begin” button, try to hold both on the same time and keeping in mind that doing to connect the printer to a power plug to switch it on. This will start the Maintenance mode on your Brother printer. See at your printer screen which will flash “Maintenance mode” or for this situation just “error 46”.
- Now, to resolve this issue or error, we have to set the Absorber pad counter to zero which because of some technical issue indicates full, causing the error 46.
- Now, for the printers with physical number pad, just write 80 to start the procedure and use the arrow keys to indicate the alternatives from the menu screen. Look down to the point when you run over “Cleanse” among with a number on the screen.
- Now, enter “2783” and look at the screen the number before “Cleanse” will be set to zero after this. Now, go back to the menu or just close the settings.
- Press “99” to leave the menu and restart the printer to give it a chance to check the changes on your printer. Once that is completed recheck to ensure the issue is resolved.
We hope, after following the all above steps you have successfully resolved your error from your printer. In case, if you got any trouble in following this procedure, then you can call immediately to Brother Customer Support to take a help.
Meet with Brother Printer Customer Support:
There is one best thing in Brother Printer Support; it’s providing a toll-free service to connect with the Brother certified technicians to take support for the users. So if you have face any issue to resolve the error 46, you can take the direct help of customer helpline number anytime. We make sure they will give you an instant service or support for your all issues. So no need to worry about any error relate to Brother Printer make a call to brother experts.